[Nov 26, 2023] JN0-636 Practice Exam Dumps – 99% Marks In Juniper Exam [Q20-Q39]

4/5 - (1 vote)

[Nov 26, 2023] JN0-636 Practice Exam Dumps – 99% Marks In Juniper Exam

Updated Verified JN0-636 Q&As – Pass Guarantee or Full Refund

Juniper JN0-636 (Security, Professional (JNCIP-SEC)) certification exam is a challenging and comprehensive exam that is designed to test the skills and knowledge of security professionals who are responsible for the implementation, configuration, and troubleshooting of Juniper Networks security solutions. Earning this certification is an excellent way to demonstrate your expertise in this field and advance your career as a network security professional.

Juniper JN0-636 (Security, Professional (JNCIP-SEC)) Exam is a certification exam offered by Juniper Networks for individuals who want to become proficient in security concepts and technologies. JN0-636 exam is designed for security professionals who have experience in security policy implementation, troubleshooting, and automation using Junos OS. The JN0-636 exam is one of the professional-level certifications offered by Juniper Networks, and passing JN0-636 exam confirms a candidate’s ability to design, implement, and troubleshoot Junos-based security platforms.

NO.20 Exhibit

The show network-access aaa radius-servers command has been issued to solve authentication issues.
Referring to the exhibit, to which two authentication servers will the SRX Series device continue to send requests? (Choose TWO)

200l:DB8:0:f101;:2

192.168.30.191

192.168.30.190

192.168.30.188

NO.21 Which three roles or protocols are required when configuring an ADVPN? (Choose three.)

OSPF

shortcut partner

shortcut suggester

IKEv1

BGP

https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-auto-discovery- vpns.html

NO.22 Exhibit

You areasked to establish an IBGP peering between the SRX Series device and the router, but the session is not being established. In the security flow trace on the SRX device, packet drops are observed as shown in the exhibit.
What is the correct action to solve the problem on the SRX device?

Create a firewall filter to accept the BGP traffic

Configure destination NAT for BGP traffic.

Add BGP to the Allowed host-inbound-traffic for the interface

Modify the security policy to allow the BGP traffic.

NO.23 Exhibit

Referring to the exhibit, an internal host is sending traffic to an Internet host using the 203.0.113.1 reflexive address with source port 54311.
Which statement is correct in this situation?

Only the Internet host that the internal host originally communicated with can initiate traffic to reach the internal host using the 203.0.113.1 address, source port 54311, and a random destination port.

Only the Internet host that the internal host originally communicated with can initiate traffic to reach the internal host using the 203.0 113.1 address, a random source port, and destination port 54311.

Any host on the Internet can initiate traffic to reach the internal host using the 203.0.113.1 address, source port 54311, and a random destination port.

Any host on the Internet can initiate traffic to reach the internal host using the 203.0.113.1 address, a random source port, and destination port 54311.

NO.24 Exhibit

Referring to the exhibit, which two statements are true? (Choose two.)

The SRX-1 device can use the Proxy__Nodes feed in another security policy.

You can use the Proxy_Nodes feed as the source-address and destination-address match criteria of another security policy on a different SRX Series device.

The SRX-1 device creates the Proxy_wodes feed, so it cannot use it in another security policy.

You can only use the Proxy_Node3 feed as the destination-address match criteria of another security policy on a different SRX Series device.

NO.25 According to the log shown in the exhibit, you notice the IPsec session is not establishing.
What is the reason for this behavior?

Mismatched proxy ID

Mismatched peer ID

Mismatched preshared key

Incorrect peer address.

https://www.juniper.net/documentation/en_US/release-independent/nce/topics/example/policy-based-vpn-using-j-series-srxseries-device-configuring.html

NO.26 You are validating bidirectional traffic flows through your IPsec tunnel. The 4546 session represents traffic being sourced from the remote end of the IPsec tunnel. The 4547 session represents traffic that is sourced from the local network destined to the remote network.
Which statement is correct regarding the output shown in the exhibit?

The remote gateway address for the IPsec tunnel is 10.20.20.2

The session information indicates that the IPsec tunnel has not been established

The local gateway address for the IPsec tunnel is 10.20.20.2

NAT is being used to change the source address of outgoing packets

NO.27 Exhibit

You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device? (Choose two.) A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.28 Your Source NAT implementation uses an address pool that contains multiple IPv4 addresses Your users report that when they establish more than one session with an external application, they are prompted to authenticate multiple times External hosts must not be able to establish sessions with internal network hosts What will solve this problem?

Disable PAT.

Enable destination NAT.

Enable persistent NAT

Enable address persistence.

NO.29 Which statement is true about persistent NAT types?

The target-host-port parameter cannot be used with IPv4 addresses in NAT46.

The target-host parameter cannot be used with IPv6 addressee in NAT64.

The target-host parameter cannot be used with IPv4 addresses inNAT46

The target-host-port parameter cannot be used with IPv6 addresses in NAT64

NO.30 Exhibit

You are not able to ping the default gateway of 192.168 100 1 (or your network that is located on your SRX Series firewall.
Referring to the exhibit, which two commands would correct the configuration of your SRX Series device?
(Choose two.)
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.31 You have set up Security Director with Policy Enforcer and have configured 12 third-party feeds and a Sky ATP feed. You are also injecting 16 feeds using the available open API. You want to add another compatible feed using the available open API, but Policy Enforcer is not receiving the new feed.
What is the problem in this scenario?

You must wait 48 hours for the feed to update

You cannot add more than 16 feeds through the available open API

You have reached the maximum limit of 29 total feeds

You cannot add more than 16 feeds with the available open API

https://www.juniper.net/documentation/en_US/release-independent/sky-atp/information- products/pathway-pages/sky-atp-admin-guide.pdf page 110

NO.32 Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)

Topology 3

Topology 5

Topology 2

Topology 4

Topology 1

https://www.juniper.net/documentation/en_US/junos-space17.2/policy-enforcer/topics/concept/ policy-enforcer-deployment-supported-topologies.html

NO.33 You issue the command shown in the exhibit.
Which policy will be active for the identified traffic?

Policy p4

Policy p7

Policy p1

Policy p12

NO.34 You are trying to configure an IPsec tunnel between SRX Series devices in the corporate office and branch1. You have committed the configuration shown in the exhibit, but the IPsec tunnel is not establishing.
In this scenario, what would solve this problem?

Add multipoint to the st0.0 interface configuration on the branch1 device.

Change the IKE proposal-set to compatible on the branch1 and corporate devices.

Change the local identity to inet advpn on the branch1 device.

Change the IKE mode to aggressive on the branch1 and corporate devices.

NO.35 You have a webserver and a DNS server residing in the same internal DMZ subnet. The public Static NAT addresses for the servers are in the same subnet as the SRX Series devices internet-facing interface. You implement DNS doctoring to ensure remote users can access the webserver.Which two statements are true in this scenario? (Choose two.)

The DNS doctoring ALG is not enabled by default.

The Proxy ARP feature must be configured.

The DNS doctoring ALG is enabled by default.

The DNS CNAME record is translated.

NO.36 SRX Series device enrollment with Policy Enforcer fails. To debug further, the user issues the following command show configuration services security–intelligence url
https://cloudfeeds.argon.juniperaecurity.net/api/manifeat.xml and receives the following output:
What is the problem in this scenario?

The device is directly enrolled with Juniper ATP Cloud.

The device is already enrolled with Policy Enforcer.

The SRX Series device does not have a valid license.

Junos Space does not have matching schema based on the

NO.37 Click the Exhibit button.

Referring to the exhibit, which two statements are true? (Choose two.)

Data is transmitted across the link in plaintext

The link is not protected against man-in-the-middle attacks

The link is protected against man-in-the-middle attacks

Data is transmitted across the link in cyphertext

NO.38 Exhibit

Which two statements are correct about the output shown in the exhibit? (Choose two.)

The packet is silently discarded.

The packet is part of an existing session.

The packet is part of a new session.

The packet is explicitly rejected.

NO.39 Exhibit

The highlighted incident (arrow) shown in the exhibit shows a progression level of “Download” in the kill chain.
What are two appropriate mitigation actions for the selected incident? (Choose two.)

Immediate response required: Block malware IP addresses (download server or CnC server)

Immediate response required: Wipe infected endpoint hosts.

Immediate response required: Deploy IVP integration (if configured) to confirm if the endpoint has executed the malware and is infected.

Not an urgent action: Use IVP to confirm if machine is infected.

Loading …

JN0-636 Real Valid Brain Dumps With 140 Questions: https://www.dumpstests.com/JN0-636-latest-test-dumps.html

[Nov 26, 2023] JN0-636 Practice Exam Dumps – 99% Marks In Juniper Exam [Q20-Q39]

No Responses

Leave a Reply Cancel reply

Related Certifications

JN0-636 Practice Tests

Recent Posts

Recent Comments

Categories