2023 Provide Updated EMC DES-3128 Dumps as Practice Test and PDF [Q31-Q49]

DES-3128 EMC

admin -

November 2, 2023

4.6/5 - (5 votes)

2023 Provide Updated EMC DES-3128 Dumps as Practice Test and PDF

DES-3128 Dumps are Available for Instant Access

EMC DES-3128 Certification Exam covers a wide range of topics, including NetWorker architecture, backup and recovery processes, data protection, and troubleshooting techniques. Successful candidates will have a deep understanding of NetWorker’s features and functionality, as well as the ability to design and implement backup solutions that meet the unique needs of their organization. DES-3128 exam is designed to test the candidate’s ability to configure, manage, and optimize NetWorker environments, ensuring that they are equipped to handle complex backup and recovery scenarios in a variety of environments.

NEW QUESTION 31
Which NetWorker module must be installed on a NetWorker client running an SAP R/3 on Oracle to ensure it is backed up properly without a need to shut down the application?

NMDA

NMM

NMMEDI

NMSAP

NEW QUESTION 32
A backup administrator wants to use an mminfo utility to run a query for several save sets from a NetWorker client running Windows 2019 However, they receive an error that the mminfo executable is not found.
What is the fastest way to resolve this issue?

Install the NetWorker Extended Client package.

Use an nsrinfo utility instead

Open a case with Dell Support

Use a Windows Explorer to find the mminfo.exe file

To use the mminfo utility, the NetWorker Extended Client package must be installed to the Windows 2019 client. This package includes the mminfo executable along with other NetWorker utilities.

NEW QUESTION 33
A customer has configured 3 new Linux server named Server01 as a backup client. They cannot see any files backed up when a restore operation is attempted Use the simulator to resolve the issue.

When you have finished, continue to the next Question

To troubleshoot why a customer cannot see any files backed up when a restore operation is attempted on their 3 new Linux server named Server01, the first step should be to check the log files for any error messages. The log files are typically located in the /var/log/ directory, but the exact location may vary depending on the operating system being used.
Next, the administrator should check the configuration of the NetWorker server to ensure that the server is configured correctly. This includes checking the client configuration for the Server01 and making sure that the correct client name is being used. Additionally, the administrator should make sure that the Server01 has the correct address and port information, as well as the correct credentials.
The administrator should also check the configuration of the server to make sure that the correct backup policies are being used and that the backup schedule is configured correctly. Additionally, they should check the configuration of the actual backup device, such as the tape library or disk array, to make sure that it is configured properly.
Finally, the administrator should check the filesystem of the Server01 to make sure that the backup files are actually being written to the correct location.

NEW QUESTION 34
A customer needs to perform a Virtual Machine Recovery from a save set located on a Dell EMC Cloud Tier.
Which additional device type must be available to perform this recovery?

AFTD

PowerProtect Storage Direct

PowerProtect DD

CloudBoost

A customer needs to have a PowerProtect Storage Direct available to perform a Virtual Machine Recovery from a save set located on a Dell EMC Cloud Tier. PowerProtect Storage Direct is a feature that allows the user to mount a cloud-based object store, like Amazon S3, Azure Blob, or Dell EMC Cloud Tier, as a local mount point. This mount point can be used to perform a recovery, like a Virtual Machine recovery, from a save set that is located on a cloud-based object store.
AFTD, PowerProtect DD, and CloudBoost are different device types, AFTD is a feature that allows the user to create a backup copy of a save set to a different location, PowerProtect DD is a deduplication storage appliance and CloudBoost is a feature that allows the user to perform backups and recoveries to and from a cloud-based object store.
It’s worth mentioning that for more information about PowerProtect Storage Direct and the supported cloud-based object stores, you can check the official Dell EMC documentation: PowerProtect Data Manager Cloud Tier (https://www.dellemc.com/en-us/storage/powerprotect-data-manager/features/cloud-tier.htm)

NEW QUESTION 35
A customer has installed a new PowerProcted DO series appliance named DD0. The DD Boost user name is ddboost and the password is abc123. A single DD Boost device named DD01.SU01 labeled to DO.VMware_Pool is needed Use the simulator to create the desired configuration When you have finished, continue to the next question.

Send the feedback for this answer.

NEW QUESTION 36
How should a backup administrator install a virtual CloudBoost appliance on a VMware ESXi host?

Invoke the VMware Update Manager to download the installation package.

Copy a zipped installation package to a Linux VM, and run the setup script

Run an executable installation package

Deploy an OVF template.

NEW QUESTION 37
A backupadministrator is deploying an extended client on a Linux host. The following error is observed during the installation:
Cannot contact a portmapper on port 7937
What is the recommended action to resolve this issue?

Install the lgtoclnt-[version].rpm package and reinstall the Extended client.

Install the lgtoserv-[version] rpm package and reinstall the Extended client.

Install the lgtonode-[version].rpm package and reinstall the Extended client.

Install the Lgtobbb-[version].rpm package and reinstall the Extendd client

NEW QUESTION 38
What is staging used for?

move data to a different storage device

keep both copies online at all times

make and keep a second copy at all times

maintain a longer retention period

Staging is used to make and keep a second copy of data at all times. This process is used to ensure data redundancy and provide additional protection against data loss or corruption.

NEW QUESTION 39
What is a feature of the CloudBoost appliance?

enables the transfer of backups to cloud storage

replaces the PowerProtect DD series appliance

enables the transfer of backups to Dell EMC Cloud Tier

replaces the PowerProtect DDVE appliance

NEW QUESTION 40
A DB2 database is running on an IBM AIX operating system. A customer asks an administrator to configure a backup with NetWorker.
How should the administrator respond?

AIX backup is not supported

NMM must be installed

No additional module is required.

NMDA must be installed

NEW QUESTION 41
Which privilege must be assigned to a user group to allow its members lo create NetWorker clients?

Monitor NetWorker

Operate NetWorker

Configure NetWorker

Remote Access All Clients

NEW QUESTION 42
A backup administrator has configured the backup of the All save set on a Linux host that contains a remote mount point. During the restore, the administrator did not see the mount point data but only local data What is the reason for this behavior?

The save command did not include the -X option.

NetWorker does not support Linux mount point backup.

Mount point backups require the extended client

The save command did not include the -x option.

NEW QUESTION 43
A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails What is the cause of the issue?

PSS is enabled for target Data Domain devices.

The Igtobbb package is not installed.

AFTD device is enabled for Client Direct.

LVM or VxVM are enabled on the OS level.

NEW QUESTION 44
An administrator has been asked to assess the options available from the NetWorker backup application.
The objectives are
Greater efficiency with virtualized and pooled resources
IT resources can be provisioned on-demand and easily returned to the resource pool Quickly allocate computing resources to meet business demands Enhanced security and protection of information assets What should be recommended to the client?

NetWorker Virtual Edition and CloudBoost virtual;

On-prem NetWorker and use CloudBoost Virtual Appliance for long-term retention

On-prem NetWorker with CloudBoost Virtual Appliance to improve recovery time objectives

Complete Data Protection Suite as Infrastructure-as-a-Service

NEW QUESTION 45
A backup administrator is performing a Block-Based Backup of a RHEL Server and it fails What is the cause of the issue?

PSS is enabled for target Data Domain devices.

The Igtobbb package is not installed.

AFTD device is enabled for Client Direct.

LVM or VxVM are enabled on the OS level.

Block-Based Backup requires that the Igtobbb package is installed on the RHEL server. If this package is not installed, then the Block-Based Backup will fail. The other options are not related to the cause of the issue.

NEW QUESTION 46
An administrator already added a client “CLientA” This client has recently been assigned a second DNS named “ClientAB” When the backup ran, the following error is observed
“The client ClientAB is not in backup servers’ clients list.”
Use the simulator to resolve this issue

When you have finished, continue to the next question

The steps to resolve the issue of the client “ClientAB” not being in the backup server’s clients list are as follows:
Verify the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Verify that the client “ClientA” is present in the list of clients.
Verify that the client “ClientAB” is not present in the list of clients.
Update the client name:
On the NetWorker server, open the NetWorker Management Console.
Go to the Clients tab.
Click on the ClientA.
In the Client Name field, update the name to “ClientAB”
In the Client Address field, enter the IP address or hostname of the client.
Click on the OK button to save the changes.
Re-schedule the backup
Go to the Clients tab.
Click on the ClientAB.
Go to the Schedules tab.
Remove the current schedule and create a new schedule for the client.
Select the appropriate schedule for the backup.
In the Save Set field, select the save set that you need to backup.
Click on the OK button to schedule the backup.
Monitor the backup process
Monitor the backup process to ensure that it is running successfully.
Check the logs for any errors.

NEW QUESTION 47
An administrator wants to make sure Oracle backups only use a specific storage node.
Use the simulator to configure an AFTD Device on “StorageNodeA” with the name “OracleBackup” using the folder “D AFTD” to the pool “Default”. This storage node should be a dedicated storage node

When you have finished, continue to the next question.

To configure an AFTD device on “StorageNodeA” with the name “OracleBackup” using the folder “D:\AFTD” to the pool “Default”, the administrator can use the Data Domain CLI (Command Line Interface) to access the Data Domain system and create the AFTD device. Here are the steps:
Log in to the Data Domain CLI by entering the following command:
ssh admin@StorageNodeA
Once logged in, create a new AFTD device named “OracleBackup” by entering the following command:
ddboost afd create –name OracleBackup –pool Default –folder D:\AFTD
Verify that the new AFTD device has been created by running the following command:
ddboost afd show –name OracleBackup
To make sure that the Oracle backups only use the specific storage node, you can assign the AFTD device to the Oracle backup host by running the following command:
ddboost afd set –name OracleBackup –host OracleBackupHost
Verify the configuration by running the following command:
ddboost afd show –name OracleBackup
To make sure that the StorageNodeA is a dedicated storage node, you can configure the storage node to only allow the OracleBackup host to use the AFTD device by running the following command:
ddboost host access add –host OracleBackupHost –afd OracleBackup
Finally, the administrator should select the “Apply” button to save the configuration.

NEW QUESTION 48
A customer has just purchased NetWorker software and asks a backup administrator to deploy a NetWorker server on an Oracle Solans 11 host How should the administrator respond?

NetWorker Server is not supported on Oracle Solaris hosts.

Install the Igtoclnt pkg. Igtoman pkg, Igtonode.pkg, Igtoauthc.pkg, and Igtoserv.pkg packages

Install Igtobbb pkg, Igtoserv pkg and Igtonode.pkg packages only

Upgrade the Oracle Solaris to version 12.

NEW QUESTION 49
A backup administrator has configured Dell EMC Cloud Tier and the NetWorker data movement policy for long-term retention. The save sets are not moved to the Cloud even though cloning ran successfully What is the reason for this issue?

Data movement policy on PowerProtect DD was not running yet

User does not have the Cloud Tier privilege

Data movement will occur only one time per month

Missing replication license on PowerProtect DD

The data movement policy on Dell EMC Cloud Tier is configured to move the save sets to the Cloud only once a month. The cloning of the save sets may have run successfully, but the data movement will still only occur once a month.

Loading …

EMC DES-3128 exam is designed for IT professionals who want to become certified as a Specialist-Implementation Engineer for NetWorker. NetWorker is an enterprise backup and recovery solution that is used by organizations worldwide to protect their critical data. DES-3128 exam covers a wide range of topics such as installation, configuration, administration, and troubleshooting of NetWorker. It is intended for individuals who have experience working with NetWorker and want to validate their knowledge and skills in this area.

Updated DES-3128 Dumps Questions For EMC Exam: https://www.dumpstests.com/DES-3128-latest-test-dumps.html