[Q42-Q63] Positive Aspects of ValidExamDumps 5V0-22.23 Exam Dumps! [Nov-2023]

5V0-22.23 VMware

admin -

November 1, 2023

4/5 - (1 vote)

Positive Aspects of Valid Dumps 5V0-22.23 Exam Dumps! [Nov-2023]

First Attempt Guaranteed Success in 5V0-22.23 Exam 2023

VMware 5V0-22.23 certification exam is designed for IT professionals who want to validate their skills and knowledge in implementing and managing VMware vSAN solutions. VMware vSAN Specialist (v2) certification exam is the newest version of VMware’s vSAN specialist certification and it covers the latest updates and features of vSAN. 5V0-22.23 exam tests the candidate’s ability to design, implement, manage, and troubleshoot vSAN solutions in a VMware vSphere environment.

VMware 5V0-22.23 certification exam is an online proctored exam that consists of 60 multiple-choice questions. 5V0-22.23 exam has a time limit of 105 minutes, and candidates are required to score at least 300 out of 500 to pass. 5V0-22.23 exam fee is $250, and it can be taken at any Pearson VUE testing center worldwide.

NEW QUESTION 42
An organization plans to implement a new vSAN 8.0 cluster to take advantage of the new features around improved I/O flow, better resiliency, and more efficient disk usage. The vSAN ReadyNodes available for the cluster consist of eight NVMe disks.
How should the organization configure the disk layout?

Use vSAN OSA and create two disk groups with one cache disk and three capacity disks each

Use vSAN ESA and the new Storage pool configuration where all disks contribute to capacity

Use vSAN OSA and thenew Storage pool configuration where all disks contribute to capacity

Use vSAN ESA and create two disk groups with one cache disk and three capacity disks each

NEW QUESTION 43
After a server power failure, the administrator noticed the scheduled resyncing in the cluster monitor displays objects to be resynchronized under the pending category.
Why are there objects in this category?

The delay timer has not expired.

These objects belong to virtual machines, which are powered off.

Object resynchronization must be started manually.

There are too many objects to be synchronized.

NEW QUESTION 44
A vSAN administrator has a cluster configured with a Storage Pool that was moved to a new physical DC.
Upon checking on the vSAN cluster health status, one of the ESXi hosts has two storage devices in a degraded state and must be replaced.
What must the vSAN administrator do to restore the health of the vSAN cluster with minimum risk?

Remove the host from ySAN configuration, replace the faulty disks, re-create the storage pool

Remove the entire storage pool, install the new devices, re-create the storage pool

Remove the host from the cluster, replace the faulty disks, re-add the host to the cluster

Remove the devices from the storage pool, replace the storage devices, claim the new devices in vSAN

NEW QUESTION 45
What is the minimum required number of hosts to provide data redundancy for a vSAN stretched cluster using dual-site mirroring and local protection with 1 failure – RAID-1 (Mirroring)?

3 hosts

4 hosts

6 hosts

NEW QUESTION 46
An application refactor requires significant storage that is being added for logs stored on a VM vDISK. The application VMs run on a dedicated vSAN enabled vSphere Cluster with custom CPUs and RAM, and therefore, cannot vMotion to another vSAN enabled cluster.
The administrator needs a vSAN feature that can be used to allocate additional storage from another vSAN enabled vSphere cluster to this vSAN enabled Cluster.
Which vSAN feature should be used for this purpose?

vSAN File Services

vSAN HCI Mesh

vSAN Replication

vSAN Stretched Clusters

NEW QUESTION 47
A vSAN administrator has recently upgraded a vSAN cluster to 8.0 OSA and has enabled Capacity Reserve features to reduce the amount of capacity reserved for transient and rebuild operations.
Which scenario would prevent this feature from operating properly?

Underutilized space is above 25-30% of the total capacity threshold.

The used space on vSAN datastore exceeds the suggested host rebuild threshold.

The used space on vSAN datastore exceeds the suggested slack rebuild threshold.

The physical disk has reached an 80% full reactive rebalance threshold.

NEW QUESTION 48
A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.
A 10GB NIC on the servers is experiencing issues, and the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Add-on.
Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

Make sure the vLCM image is configured to use the most recent version of the Vendor Add-on

Add an individual component to the vLCM image that has the updated NIC driver

Remove theVendor Add-on from the vLCM image, and then manually install the network driver on the servers

Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver

NEW QUESTION 49
A vSAN administrator of a non-internet connected vSAN environment wants to upgrade the environment from the vSAN 7.0 U3 to the vSAN 8.0 using vLCM.
Which option, if any, should be used as a depot in this case?

Configure the vSphere Lifecycle Manager to download the updates from an Online Depot.

Configure the vSphere Lifecycle Manager to download the updates from the VMware Depot using HTTPS.

Configure the vSphere Lifecycle Manager to download updates from a local UMDS-shared repository.

It is not possible to use the vSphere Lifecycle Manager on a non-internet connected environment.

NEW QUESTION 50
An administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any virtual machines that are created are placed in the appropriate site.
Which two steps are needed to complete this task? (Choose two.)

Create VM/Host groups for the two sites

Create a single VM/Host group across both sites

Put the VMs in a vSphere DRS group

Put the VMs in the correct VM group

Create a storage policy that includes site affinity rules and apply to VMs

NEW QUESTION 51
During yesterday’s business hours, a cache drive failed on one of the vSAN OSA nodes. The administrator reached out to the manufacturer and received a replacement drive the following day. When the drive failed, vSAN started a resync to ensure the health of the data, and all objects are showing a healthy and compliant state. The vSAN administrator needs to replace the failed cache drive.
Which set of steps should the vSAN administrator take?

Physically replace the failed cache device, and vSAN will automatically create a new disk group. Then, remove the disk group with the failed device.

Place the disk group into maintenance mode, and select Full Data Migration. Then, physically replace the failed cache device. Afterwards. vSAN will rebuild the disk group automatically.
C Remove the existing vSAN disk group and physically replace thedevice. Thencheck to verify that the ESXi host automatically detects the new device Afterwardsmanually recreate the Disk Group

Physically replace the failed cache device, and vSAN will automatically allocate the storage. Then, rebalance the cache layer.

NEW QUESTION 52
An existing vSAN OSA cluster has this specification:
Four ESXi hosts with all flash configuration
Each with two disk groups
Each disk group with one cache device and four capacity devices
There are five more device slots available per host
The CTO would like to provision new applications, and these will need more capacity and performance.
Which two methods should be used by the vSAN administrator to meet this goal with the least amount of impact? (Choose two.)

Replacing all capacity devices with a similar larger device

Replacing all cache devices with a larger device

Adding one more disk group per host with the same configuration

Adding faster cache devices

Adding an ESXi host with identical device configuration

Explanation
Adding one more disk group per host with the same configuration and adding an ESXi host with identical device configuration are the two methods that the vSAN administrator should use to meet the goal of increasing capacity and performance with the least amount of impact. Adding one more disk group per host will increase the raw storage capacity by 20% and also improve the performance by distributing the I/O load across more cache devices and disk groups. Adding an ESXi host with identical device configuration will increase the raw storage capacity by 25% and also improve the performance by adding more compute and network resources to the cluster. Both methods can be done without disrupting any ongoing operations or requiring any data evacuation or resynchronization.
The other options are incorrect for the following reasons:
Replacing all capacity devices with a similar larger device is incorrect because it will not increase the performance and will have a significant impact on the cluster. Replacing the capacity devices requires deleting the disk groups, which will erase all data on them and trigger a resynchronization of the affected objects. This can be disruptive and time-consuming, and also introduce additional network and disk traffic.
Replacing all cache devices with a larger device is incorrect because it will not increase the capacity and will have a significant impact on the cluster. Replacing the cache devices also requires deleting the disk groups, which will have the same drawbacks as replacing the capacity devices. Moreover, increasing the cache size may not improve the performance significantly, as vSAN OSA uses afixed cache ratio of
70% for write buffer and 30% for read cache, regardless of the cache device size.
Adding faster cache devices is incorrect because it will not increase the capacity and will have a significant impact on the cluster. Adding faster cache devices also requires deleting the disk groups, which will have the same drawbacks as replacing the cache devices. Furthermore, adding faster cache devices may not improve the performance significantly, as vSAN OSA uses a fixed cache ratio of 70% for write buffer and 30% for read cache, regardless of the cache device speed. References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 10
Expanding a vSAN Cluster

NEW QUESTION 53
Which vSAN maintenance mode option should be used to avoid storage policy non-compliance?

Ensure accessibility

Partial maintenance mode

Full data migration

No data migration

NEW QUESTION 54
A vSAN administrator is planning to deploy a new vSAN cluster with these requirements:
* Physical adapters share capacity among several traffic types
* Guaranteed bandwidth for vSAN during bandwidth contention
* Enhanced security
Which two actions should be taken to configure the new vSAN cluster to meet these requirements? (Choose two.)

Create static routes between the vSAN hosts

Use IOPS Limit rules in storaqe policies

Utilize Network I/O Control

Enable jumbo frames

Isolate vSAN traffic in a VLAN

NEW QUESTION 55
An administrator has deployed a new vSAN OSA cluster that contains eight hosts and needs to configure a storage policy for the currently deployed database virtual machines. The requirements state that if two hosts in the vSAN OSA cluster fail, all virtual machines are unaffected.
Which RAID configuration must the administrator use in this storage policy to achieve the best performance for the database virtual machines?

RA1D-1

RAID-5

RAID-6

RAID-0

NEW QUESTION 56
An administrator wants to assign a storage policy to a workload on a two-node vSAN OSA cluster consisting of three disk groups each with nested fault domains. The virtual machine must be protected against a disk or disk group failure.
Which two storage policies meet these requirements? (Choose two.)

RAID-5/FTT 2

RAID-1/FTT 3

RAID-6/FTT 2

RAID-5/FTT 1

RAID-1/FTT 1

NEW QUESTION 57
Which VMware solution requires vSAN usage?

VMware Cloud Foundation

VMware Horizon

VMware Telco Cloud Automation

VMware Aria Automation

NEW QUESTION 58
Which two actions are recommended when adding a host to a vSAN cluster? (Choose two.)

Create uniformly-configured hosts

Disable vSAN performance service

Disable vSphere Cluster Services

Disable vSphere High Availability (HA)

Reference the VMware Compatibility Guide

NEW QUESTION 59
An administrator is troubleshooting a vSAN performance issue. In the vSAN performance monitor there is a high latency on the vSAN cluster.
What is a possible cause of this?

The Virtual Machines are using PVSCSI controllers.

Erasure Coding is disabled in the storage policy.

There is congestion in one or more disk groups.

Jumbo frames are not enabled on the VMkernel adapters.

NEW QUESTION 60
An administrator is upgrading multiple vSAN Witness nodes with vLCM (single image management) that are used for vSAN Stretched and two-node Clusters.
What two witness node types can the administrator upgrade? (Choose two.)

Appliance witness node

Shared witness node

Nested witness node

Dedicated witness node

Physical witness node

NEW QUESTION 61
An administrator must choose between deploying a virtual witness or a physical witness for a vSAN Stretched Cluster. The administrator eventually decides to use a virtual witness.
What is a benefit of selecting this approach?

Increased vSAN datastore capacity

Shared metadata between separate clusters

Reduced vSphere licensing

Additional compute capacity for running VMs

Explanation
The correct answer is C, reduced vSphere licensing. This is because using a virtual witness appliance instead of a physical witness host can save on vSphere licensing costs, as the virtual witness appliance does not consume a vSphere license. The virtual witness appliance is a preconfigured virtual machine that runs ESXi and is distributed as an OVA file. It can be deployed on any ESXi host that has network connectivity to both data sites of the stretched cluster. The virtual witness appliance does not run any virtual machines other than itself and only hosts witness components of virtual machine objects. The other options are incorrect for the following reasons:
A, increased vSAN datastore capacity, is incorrect because using a virtual witness appliance does not affect the vSAN datastore capacity. The witness appliance does not store any customer data, only metadata, such as the size and UUID of vSAN object and components. The witness appliance also does not contribute any storage devices to the vSAN datastore.
B, shared metadata between separate clusters, is incorrect because using a virtual witness appliance does not enable sharing metadata between separate clusters. The witness appliance is dedicated to one stretched cluster and cannot serve as a witness for multiple clusters. The witness appliance maintains consistency between the two data sites of the stretched cluster by hosting witness components that act as tie-breakers in case of a site failure or network partition.
D, additional compute capacity for running VMs, is incorrect because using a virtual witness appliance does not provide additional compute capacity for running VMs. The witness appliance does not run any VMs other than itself and does not participate in any compute operations of the stretched cluster. The witness appliance only hosts witness components that consume minimal CPU and memory resources.
References:
VMware vSAN Specialist v2 Exam Preparation Guide, page 11
Deploying a vSAN Witness Appliance

NEW QUESTION 62
A vSAN administrator has an existing cluster where each ESXi host has the following:
Disk group #1 with one cache device and three capacity devices.
Disk group #2 with one cache device and two capacity devices.
What must the vSAN administrator do to expand disk group #2 to have three capacity devices?

Create a new disk group with a single capacity device and then migrate the existing capacity devices

Add the new capacity device to the disk group and vSAN will automatically rebalance

Put the entire ESXi host in maintenance mode, evacuate all data, then add the new capacity device

Put the disk group in maintenance mode, evacuate all data, then add the new capacity device

NEW QUESTION 63
What is the purpose of host rebuild reserve in vSAN?

Reserves space for internal operations

Reserves space in case of single host failure

Stores vSphere HA heartbeats

Allocates capacity for vCLS

Practice LATEST 5V0-22.23 Exam Updated 75 Questions: https://www.dumpstests.com/5V0-22.23-latest-test-dumps.html

#5V0-22.23 latest test name 5V0-22.23 Training Kit 5V0-22.23 valid test online new 5V0-22.23 exam pass4sure new 5V0-22.23 exam questions

[Q42-Q63] Positive Aspects of ValidExamDumps 5V0-22.23 Exam Dumps! [Nov-2023]

No Responses

Leave a Reply Cancel reply

Related Certifications

5V0-22.23 Practice Tests

Recent Posts

Recent Comments

Categories