DES-4122 Exam Dumps – PDF Questions and Testing Engine [Q27-Q50]

4/5 - (2 votes)

DES-4122 Exam Dumps – PDF Questions and Testing Engine

DES-4122 Dumps – The Sure Way To Pass Exam

NO.27 What are key values related to systems management when deploying OpenManage Enterprise wit Dell EMC PowerEdge servers?

Automate
Basic Hardware Element Management
Agent-free Management
Simple and effective

Simplify
Basic Hardware Element Management
Agent-free Management
Fee-based license

Simplify
Fee-based license Agent-free Management Secure

Simplify
Unify
Automate
Secure

NO.28 Starting from which Dell EMC PowerEdge server hardware generation is the Micro SD card in the IDSDM/vFlash module supported?

11G

12G

13G

14G

NO.29 Which card connects to the PCI bus, is physically smaller than a on the system board of a Dell EMC PowerEdge 14G server?

NDC

OCP

PCIe

FPGA

NO.30 A system engineer has a 14G Dell EMC Poweredge server with an amber light blinking. The engineer must pull a SupportAssist collection before calling Dell Support to evaluate what the potential problem. Use the simulator to collect and view the SupportAssist collection.

NO.31 What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

SupportAssist Enterprise

iSM

OpenManage Essentials

iDRAC9

NO.32 A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?

Configure servers to access the remote firmware repository

Enable the Match Firmware of Replaced Part setting in the system BIOS

Install and configure a repository manager

Enable the Collect System Inventory On Restart (CSIOR) attribute

NO.33 What is a characteristic of out-of-band management?

Dedicated device

Agent based

Less secure

Dependent upon OS

NO.34 You are Investigating a disk error on a Dell EMC PowerEdge server and discover a Hot Spare has not been assigned to the Virtual Disk Group. Use the simulator to assign the Global Hot Spare. When you have finished using the simulator, dick Next.

Send us your suggestion for this simulation task.

A technician wants to

NO.35 What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?

Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices

Dispatches technical support from Dell for all Dell servers, storage, and networking devices

Proactive, predictive, and automated support technology to enable faster resolution and reporting

Includes onsite monitoring and automated collection of system state information

NO.36 You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server. What is the only supported mode?

RAID 0

RAID 5

RAID 1

Non-RAID Mirroring

NO.37 A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed How can the technician upgrade the license?

The license cannot be upgraded on a single PSU system

Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server

The license cannot be upgraded because the user will not allow the server to be powered on

Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down

NO.38 What is required for iDRAC Direct 2.0 to connect with IDRAC9 interfaces such as RACADM and WSMAN?

Wi-Fi connection

NFC connection

Ethernet cable

Micro-AB USB

NO.39 A technician working with a Dell EMC PowerEdge 1 take corrective action?

Check the System Event Log
Check PSU LED
Reseat the PSU

Check the System Event Log
Check PSU LED
Do a virtual reseat of the iDRAC

Check the LCC Log
Check PSU LED
Reseat the CPU

Check the LCC Log
Check PSU LED
Reseat the PSU

NO.40 An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?
A)

B)

D)

Option A

Option B

Option C

Option D

NO.41 A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed How can the technician upgrade the license?

The license cannot be upgraded on a single PSU system

Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server

The license cannot be upgraded because the user will not allow the server to be powered on

Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down

NO.42 A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only “sees” 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?

System Profile

Virtualization Technology

HyperThreading

Number of Cores per Processor

NO.43 A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode. What is the minimum size DIMM supported for this type of memory?

64 GB

128 GB

256 GB

512 GB

NO.44 Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?

4x 3.5″ drives

2×3.5″ drives

8×2 5″ drives

6×2 5″ drives

NO.45 What is a valid password option available from the iDRAC9 Unique ID feature?

Encryption Default

Secure Default

Legacy Generated

Randomly Generated

NO.46 A Dell EMC PowerEdge server has been updated with an LCC and iDRAC DUP to the latest firmware when performing a firmware rollback?

Both the iDRAC and the LCC can be rolled back

The LCC can be rolled back; the iDRAC cannot be rolled back

The iDRAC can be rolled back; the LCC cannot be rolled back

The iDRAC cannot be rolled back and the LCC cannot be rolled back

NO.47 For a temporary migration task the CPU core count on the Dell EMC PowerEdge R640 server needs to be reduced to 8 because the installed application will not work due to license restrictions. Use the simulator to apply the change so the application can be installed.
When you have finished using the simulator, click Next.

NO.48 What are the default settings used when applying firmware and a configuration to a replaced part using the Lifecycle Controller?

Firmware: Upgrade to latest available version
Configuration Apply always

Firmware Allow version upgrade only
Configuration: Disabled

Firmware: Match firmware of replaced part
Configuration Apply always

Firmware Disabled
Configuration Apply only if firmware match

NO.49 For security reasons, the Dell EMC PowerEdge server power button must be disabled. Use the System Setup Utility in the simulator to disable the power button. When you have finished using the simulator, click Next.

NO.50 An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment The inventory consists of:

The server power configuration will be set for gnd redundancy The management switch is 1000 Base-T and the top of rack switches 10Gb What additional component(s) is needed for this configuration?