100% Real & Accurate H19-401_V1.0 Questions and Answers with Free and Fast Updates [Q164-Q188]

H19-401_V1.0 Huawei

admin -

March 1, 2026

Rate this post

100% Real & Accurate H19-401_V1.0 Questions and Answers with Free and Fast Updates

Get Unlimited Access to H19-401_V1.0 Certification Exam Cert Guide

Huawei H19-401_V1.0 (HCSP-Presales-Campus Network Planning and Design V1.0) Exam is designed to test the knowledge and skills of individuals who are interested in planning and designing campus networks using Huawei products and technologies. HCSP-Presales-Campus Network Planning and Design V1.0 certification exam is aimed at professionals who want to demonstrate their expertise in planning and designing complex networks, and who wish to advance their career in the field of network engineering.

To prepare for the exam, candidates should have a comprehensive understanding of networking concepts and technologies, as well as practical experience in deploying and managing networks. Huawei provides an exam preparation guide, training courses, and practice exams to help candidates certify their knowledge and skills. Passing the Huawei H19-401_V1.0 exam is an impressive accomplishment and is recognized as such by employers and clients.

QUESTION 164
Check the running status of dual-machine hot standby, and the displayed device role is incorrect, as shown below HRP_ M[sysnamel display hrp state Role: active, peer: standby (should be
“active-active*”) Running priority: 47006, peer :46002 Core state: abnormal (active), peer:
abnormal (standby) Backup channel usage: 0% Stable time: O days, 0 hours, 15 minutes. What are the possible reasons? (Multiple choice)

The BFD or /P-Link status monitored by HRP is abnormal.

VB. VRRP status is abnormal

The number of active and standby firewall boards is inconsistent

The CPU of a certain service board was not successfully registered.

The interface status monitored by HRP is abnormal.

QUESTION 165
Which of the following does Oceanstor Dorado recommend testing? (Multiple Choice)

Multiple controller failure

SAN&NAS integration

SmartQos

RAID-TP

QUESTION 166
SRv6 BE is different from MPLS labels. After the head node encapsulates the IPv6 header, SRv6EVPNL3VPN forwards the intermediate node completely based on IGP and finds routes through the shortest path algorithm in a fault-free scenario.

True

False

QUESTION 167
Application-based intelligent routing is intelligent routing based on application priority, link quality, load balancing, and bandwidth occupancy.

True

False

QUESTION 168
Which of the following docking log protocol does Hisec LogAuditor1500 product support?
(Multiple choice)

TCP

Syslog

NMPTrap

HTTP

QUESTION 169
The authentication protocol currently used by the authentication service is ().

SAML

RESTFUL

OAUTH

AAA

QUESTION 170
In Huawei’s free mobility solution, which of the following devices can be used as access devices toauthenticate terminals thanks to IP-security group entry synchronization?

Switch

Firewall

Huawei’s free mobility solution enhances user authentication and access control by synchronizing IP-security group entries across devices, ensuring seamless policy enforcement. The HCSP-Presales-Campus Network Planning and Design V1.0 documentation specifies:
Switches: Campus switches (e.g., CloudEngine series) can act as access devices, authenticating terminals via methods like 802.1X or MAC authentication. They support IP-security group synchronization to enforce consistent policies.
APs (Access Points): Wireless APs (e.g., AirEngine series) serve as access devices in WLAN scenarios, authenticating terminals via 802.1X, portal, or MAC methods. They also participate in IP-security group synchronization for mobility.
AR (Access Routers): While AR routers (e.g., NetEngine AR series) can perform authentication in certain contexts, they are typically not access devices in the free mobility solution’s context, focusing instead on routing and WAN functions.

QUESTION 171
Which one is not the core role in the business travel plan?

Terminal

iMasterNCE-Campus

Policy execution point

AAA server

QUESTION 172
Roles are used to specify the access permissions of MSPs/tenants. Which of the following roles are preset in SD-WAN?

Operator

Auditor

Monitor

Tenant administrator

SD-WAN roles define permissions. The HCSP-Presales-Campus Network Planning and Design V1.0 documentation confirms:

QUESTION 173
Which of the following statements about Veeam secure recovery is correct?

Automatically disconnect the link and move data to the isolation area to improve security.

The backup storage of the production center and safe isolation area adopts secure snapshot technology to ensure that the data is read-only and cannot be modified or deleted within the specified time.

SMB messages are transmitted in ciphertext to prevent data theft.

Before recovery, please start the disease prevention software scan to restore the data to the production environment. Start the virtual machine in the isolation environment (virtual laboratory) and check whether the virtual machine is normal

QUESTION 174
End XSID represents the Endpoint SID of the Layer 3 cross-connection, which is used to identify a link in the network. Similar to the Adjacency SID in SR-MPLS; End.XSID is diffused to other network elements through the IGP protocol and is globally visible and locally valid.

True

False

QUESTION 175
In network protection scenarios, localized security products operate individually, which can easily lead to protection shortcomings and lack the overall coordinated security protection effect. Which of the following security products can be introduced to enhance the joint prevention and control capabilities of the Internet border?

Net Shield KO1

WAF

Firewall

Vulnerability Scanning

QUESTION 176
Which packets will be controlled by security policies after the basic protocol packet enable switch is turned off? (Multiple choice)

SNMP

BGP

OSPF

HRP

QUESTION 177
In the CloudCampus public cloud deployment scenario, after the device is detached from the cloud management platform, the local service forwarding function of the device is still available.

True

False

QUESTION 178
In WLAN scenario, among the four service flows in EDCA, ( ) have the highest priority:

AC_Vl

AC_bk

AC_BE

AC_vo

QUESTION 179
Click the “Experience” item in the campus planning and design tool to view typical networking scenario planning data, but the design content cannot be exported.

True

False

QUESTION 180
Regarding OceanProtect backup storage, which of the following statements is correct? (Multiple choice)

The maximum system backup bandwidth of OceanProtect X9000 is 155TB/hour

The maximum backup bandwidth of the OceanProtect X9000 system is three times that of the industry

The maximum system recovery bandwidth of 0ceanProtect X9000 is 172TB/hour

The maximum recovery bandwidth of the OceanProtect X9000 system is five times that of the industry

QUESTION 181
In the park scenario, what is correct about the policy linkage function?

When the authentication point and the group policy execution point are not on the same device, you need to use the policy linkage function.

In the policy linkage scenario, it is necessary to set the downlink port type of the Edge device to an extended access switch.

The policy linkage function means that no matter where you go, the permissions to access resources are the same and are decoupled from the IP address.

When the authentication point, access point, and group policy execution point are all connected to the access device, the policy linkage function must be used.

QUESTION 182
In the WLAN Planner tool, internal and external network users can share projects with each other.

True

False

QUESTION 183
WLAN R22 version, which of the following description about the air interface slicing enhancement is incorrect?

Same-AP uses different slots/sub-slots for uplink and downlink slices.

The multimedia slicing traffic diversion solution is SAC/DFI application identification ACL traffic identification.

The ordinary slice traffic diversion solution uses IP layer DSCP to map to different queues.

The highly reliable slice traffic diversion solution is ACL traffic identification.

QUESTION 184
Which statements about RR in Huawei SD-WAN solution are correct? (Multiple choice)

Establish EBGP peer relationships between RR and all edge site CPEs.

RR supports independent deployment mode or co-deployment with Edge sites.

There can be one or more RRs in the network.

The CPE at the RR site serves as a route reflector.

QUESTION 185
The intelligent campus network solution can support multiple devices and multiple modes of campus interconnection scenarios. Due to the different capabilities supported by the devices, appropriate devices need to be selected for network design in different scenarios. The Internet- based model can be divided into which of the following scenarios? (Multiple choice)

Multi-branch, single headquarters/data center interconnection (single Hub node, IPSec VPN networking)

Multi-branch, multi-headquarters/data center interconnection (AR connected to FW, EVPN networking)

Multi-branch, multi-headquarters/data center interconnection (AR EVPN networking)

Multi-branch, multi-headquarters/data center interconnection (multi-Hub nodes, IPSec VPN networking)

QUESTION 186
The host name of the server or node must be unique when deploying the NCE-Campus platform and does not support modification after the installation is complete.

True

False

QUESTION 187
iMaster NCE-Campus can synchronize user groups and user accounts from Active Directory (AD) and other standard Lightweight Directory Access Protocol (LDAP) servers. Administrators can enable this function when configuring user access and authentication, avoiding the need to manually add user accounts.

TRUE

FALSE

iMaster NCE-Campus enhances user management efficiency in campus networks. The HCSP-Presales- Campus Network Planning and Design V1.0 documentation confirms:
It supports integration with Active Directory (AD) and LDAP servers to synchronize user groups and accounts. This allows centralized user management without manual entry on the NCE platform.

QUESTION 188
In a multi-campus interconnection scenario, the correct description of Hub-spoke active-active design is (). (Multiple Choice)

Based on the configured HUB spoke topology and the added site role, the AC automatically generates the corresponding routing policy for controlling the topology and sends it to the RR. The construction principle of the dual hub-Spoke topology is the same as the active and backup hub mode.

Hub-spoke active-active mode realizes hub active-active based on active and standby hubs in different business network segments.

When OSPF/BGP on the Hub LAN side introduces Overlay route advertisement, it needs to support configuring different Cost/MED values based on different IP prefixes.

Supports dual-hub site networking. Each hub site can support one or two CPEs; dual-hub sites adopt a dual-active mode based on business network segments, with active/active modes for different network segments.

Loading …