Updated Free Cisco 300-625 Test Engine Questions with 72 Q&As [Q37-Q59]

Rate this post

Updated Free Cisco 300-625 Test Engine Questions with 72 Q&As

The Best CCNP Data Center 300-625 Professional Exam Questions

Typical Candidate Profile

Think of the Cisco 300-625 exam only if you want to cement your feet in the world of Cisco data center technologies. Alone or in combination with other tests, it allows one to hone competencies related to this field and solidify their knowledge base. Professionals who have already been working in a job role like technical/technological decision-makers or network architects are perfect for this exam.

NEW QUESTION 37
Which EtherType is used by the FCoE Initialization Protocol?

0*8913

0*8914

0*xfc0e

0*8906

NEW QUESTION 38
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?

MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual

MDS(config)# fcsp esp manual

MDS(config)# interface fc 1/1 MDS(config-if)# fcsp mode gcm MDS(config-if-fcsp)# fcsp esp manual

MDS(config)# interface fc 1/1 MDS(config-if)# fcsp esp manual MDS(config-if-fcsp)# mode gcm

NEW QUESTION 39
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits.

Cisco Secure Boot

UEFI Secure Boot

Secure Unique Device Identifier

BIOS Secure Boot

NEW QUESTION 40
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user.
Which argument does the engineer use to clear the lock from the zoning database configuration?

commit

abort

clear

force

NEW QUESTION 41
Which component is initially responsible for loading the kickstart image on Cisco MDS Switches?

ROMMON

BIOS

NX-OS

BASH

NEW QUESTION 42
After user account attributes are modified in Cisco NX-OS, when do changes to the user’s session attributes take effect?

immediately

at the scheduled time

when the user logs out of a session

when the user creates a new session

NEW QUESTION 43
DRAG DROP
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were-derived on the right.
Select and Place:

Section: Implementation
Explanation/Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/ guides/cli_3_3_1/npv.html#wp1502832

NEW QUESTION 44
Refer to the exhibit.

A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?

1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.

1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.

1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range.

1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.
2. Activate the zone set Zoneset10-A.

Section: MDS Troubleshooting

NEW QUESTION 45
A storage network engineer must configure a 48-port Cisco MDS switch to reject any login requests to VSAN
10 from unauthorized Fibre Channel devices and switches. All the devices that were already logged in to the switch from this VSAN must be allowed without any manual configuration. Which configuration must be applied?

switch(config)# feature port-security
switch(config)# port-security activate vsan 10

switch(config)# feature port-security
switch(config)# port-security activate vsan 10 no auto-learn

switch(config)# feature port-security
switch(config)# port-security database vsan 10
switch(config-port-security)# any-wwn interface fc1/1 – fc1/48

switch(config)# port-security activate vsan 10

NEW QUESTION 46
What does an unlicensed DCNM SAN fail to display?

Fibre Channel, FCoE, and iSCSI topologies

events and fault management

historical performance monitoring

real-time performance monitoring

NEW QUESTION 47
A storage administrator manually configures a storage switch to use a new static domain ID. After issuing an fcdomain restart vsan 1 command, the administrator sees that the switch is still using the existing domain ID.
What is the reason why the configuration is not working?

Static domain IDs apply only after a switch is rebooted.

The disruptive keyword was not used on the command.

Build fabric notifications were not sent to the other switches.

Domain manager fast restart is not enabled on the switch.

NEW QUESTION 48
Refer to the exhibit.

Refer to the exhibit. The san-user must configure FSPF on the VSAN 500. but fails. An operator with network administrative rights must authorize the san-user to perform this work. Which configuration must the operator apply?

MDS-A(config)# role name sangroup
MDS-A(config-role># no rule 2

MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 4 permit config feature fspf

MDS-A(config)# role name sangroup
MDS-A(config-role)# rule 2 permit config feature vsan

MDS-A(config)# role name sangroup
MDS-A(config-role)# vsan policy deny
MDS-A(config-role-vsan)# permit vsan 500

NEW QUESTION 49
A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate properly through the switch. Why is the new server failing to connect?

The fabric data plane resets as part of the upgrade process.

The new server is unable to log in to the fabric to receive an FC-ID.

The upgrade process disables any currently unused ports.

The zoning database is locked during the upgrade process.

NEW QUESTION 50
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?

commit

abort

clear

force

Section: Implementation

NEW QUESTION 51
Which two components are required for successful MDS USB POAP (Choose two.)

NTFS formatted USB drive

USB drive in port 1

script named poap_script pl

ENTERPRISE_PKG license

system and kickstart images

NEW QUESTION 52
Refer to the exhibit. A network engineer created a new user that uses the VSAN-Admin role on a Cisco MDS switch so a new colleague can manage the VSANs configured on the switch.
Which action is required for the configuration to give permission to the new colleague?

permit vsan 1-1000 must be configured as rule 5.

permit vsan 1-1000 must be configured as rule 1.

permit vsan 1-1000 must be configured under the VSAN policy deny.

permit vsan 1-1000 must be configured under the VSAN policy allow.

NEW QUESTION 53
Which two steps are mutual between Cisco secure boot and UEFI secure boot? (Choose two.)

bootloader

operating system

microloader

kemel

hardware anchor

Section: Deployment

NEW QUESTION 54
Refer to the exhibit. A network engineer must configure the SAN telemetry streaming feature to stream statistics form a Cisco MDS 9000 Series Switch to two external receivers with the IP addresses 192.168.1.4 and 192.168.1.5.
Which two configurations accomplish this configuration? (Choose two.)

Add IP address 192.168.1.5 port 50005 protocol gRPC encoding GPB under destination-group
100.

Add IP address 192.168.1.5 port 50005 protocol gRPC encoding GPB under destination-group
300.

Add dst-grp 200 under subscription 100.

Add dst-grp 300 under subscription 200.

Add dst-grp 100 under subscription 200.

NEW QUESTION 55
Which configuration is always required when running the setup utility on a Cisco MDS 9000 Series Switch?

administrator password

management IP address

active NTP server

active default gateway

Section: Implementation

NEW QUESTION 56
Which EtherType is used by the FCoE Initialization Protocol?

0x8913

0x8914

0xxfc0e

0x8906

NEW QUESTION 57
Refer to the exhibit. What is the result of the configuration?

No-drop CoS values are advertised by the DCBX.

LFC is prioritized over PFC on Ethernet 1/10.

PFC operates on Ethernet 1/10 regardless of the capability of the peer.

PFC fails to operate properly unless LFC is disabled on Ethernet 1/10.

NEW QUESTION 58
Refer to the exhibit.

What is the result of merging the fabric?

The merged fabric IVR VSAN topology is set to activate.

The merged fabric has NAT enabled.

The merge is invalid.

The merged fabric contains only service group Group1.

Section: Implementation

NEW QUESTION 59
Which action must be performed to deactivate a VSAN without losing its configuration?

Isolate it.

Delete it.

Rename it.

Suspend it.

Section: Implementation

Loading …

Requirements to Fulfill

Cisco 300-625 is specifically designed to assert the skills and understanding essential for working with the ever-evolving data center technologies. To get accredited, the candidates should gain the passing score in one required core exam and one of 5 concentration tests at choice. If you want to get the professional-level certificate, it is recommended to have at least 3-5 years of hands-on experience in working with implementing data center solutions along with routing and switching. It is not a strict requirement, but this level of expertise will certainly help you deal with both the qualifying exams.

Try 100% Updated 300-625 Exam Questions [2022]: https://www.dumpstests.com/300-625-latest-test-dumps.html

Updated Free Cisco 300-625 Test Engine Questions with 72 Q&As [Q37-Q59]

Typical Candidate Profile

Requirements to Fulfill

No Responses

Leave a Reply Cancel reply

Related Certifications

300-625 Practice Tests

Recent Posts

Recent Comments

Categories