[Q27-Q50] OmniStudio-Developer Free Update With 100% Exam Passing Guarantee [2022]

admin -

April 13, 2022

4/5 - (1 vote)

OmniStudio-Developer Free Update With 100% Exam Passing Guarantee [2022]

[Apr-2022] Verified Salesforce Exam Dumps with OmniStudio-Developer Exam Study Guide

NEW QUESTION 27
A developer is configuring a DataRaptor Load to Save contract data. The developer needs to set the record type of the contactusing DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requestedField list.

NEW QUESTION 28
CORRECT TEXT
The card layout below has an Integration Procedure as a data source. The cards use the layout data source.

Which JSON data structure below supports this card layout and uses best practices.

“”ContactCellPhone: “(212) 154-8562”,
“ContactName”: “Edward Stamos”,
“AccountPhone”: “2221546450”,
“AccountName”: “Acme”
I
{
“ContactCellPhone: “(650) 156-1102”,
“ContactName”: “Howard Jones”,
“AccountPhone”: “2221546450”,
“AccountName” “Acme”
}
]

“Contact”: [
{
“CellPhone”: “(212) 154-8562”,
“Name”: “Edward Stamos”
},
t
“CellPhone”. “(650) 156-1102”,
“Name”: “Howard Jones”
}

NEW QUESTION 29
When launching an OmniScript from an action on a FlexCard, the OmniScript displays, but no Salesforce data is populated:
Which two errors could cause this behavior?
Choose 2 answers
Choose 2 answers

The Id Field for Actions in the FlexCard is blank.

There is no active version of the Data Raptor Extract.

There is no active version of the OmniScript

In the DataRaptor Extract Action, the Input Parameters Filter Value is misspelled.

NEW QUESTION 30
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community’s theme.
What must be developer do to configure the FlexCard for deployment in a Community?

Add the FlexCard’s API name to FlexCard Player component

Set the Target property in publish Options to Communitypage”

Configure the Component visibility in the custom Component.

Set the Developer property in Card Configuration to ”Community”

NEW QUESTION 31
A developer is creating a FlexCard and needs to display additional information using a Flyout.
Which two types of components can the developer embed m the flyout?
Choose 2 answer

An OmniScript

An Integration Procedure

A DataRaptor

A Child FlexCard

NEW QUESTION 32
A developer configure a Flexcard with a DataRaptor data source that uses the params.id as an. When the developer clicks Views Data on the FlexCard, valid data displays. However, when the developer previews the layout, the FlexCard does not display. What could cause this error?
Choose 2 answers

The Data Node field for the FlexCard is empty.

The RecordId in the Test Data Source settings ins for the wrong record type.

The attribute haven’t been configured to pass the data to the fields.

There is not Salesforce record for the FlexCard based on the RecordId in the layout’s Test Data Source Settings.

NEW QUESTION 33
A developer need to configure a calculation procedure to calculation a subtotal using two different depending on whether the input Boolean variable is Customer is set to true or false.
How should a developer configure the calculation procedure to conditionally execute the correct formula?

Use two separate Calculation Steps with the Conditional Step property selected: use the ISTRUE(isCustomer) and NOT (ISTRUE) (isCustomer) functions in the Condition syntax.

Use two separate Calculation Steps with the Conditional Step property selected: reference just the isCustomer variable in the Conditional syntax (no comparison necessary)

Use two separate Calculation Steps with the Conditional Step property selected: compare the isCustomer variable directly to the literal true and false values in the Condition syntax.

Use a single Calculation Steps with IF statement directly in the formula definition to reference the isCustome variable and conditionally perform the appropriate calculation.

NEW QUESTION 34
What parent JSON node name must be sent to a Calculation Procedure?

input

Input

inputs

Inputs

NEW QUESTION 35
Refer to the exhibit.

The card layout uses an integration Procedure as a data source. The cards use the layout data source.
Which JSON data structure supports this card layout and follows best practices?
A)

B)

C)

Option A

Option B

Option C

NEW QUESTION 36
A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

NEW QUESTION 37
You want to edit a FlexCard.
Which question should you ask and answer before you make changes to the active version of the FlexCard?

Is the FlexCard used anywhere else?

Will the FlexCard only be used for testing?

Where will the FlexCard be available to use?

Has the FlexCard been cloned before?

NEW QUESTION 38
A developer need to use the CONTIF function to process data entered by the user in an OmniScript. The output of the function needs to be displayed to the user immediately in the current step.
Based on best practice, what element should the developer use this function in?

A Calculation Action element

A Set Values element

A formula element

A Range element

NEW QUESTION 39
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?

Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:

Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.

Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:

Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%

NEW QUESTION 40
In which two fields in an Integration Procedure or DataRaptor can you use a function like CONCAT or DATEDIFF? Choose 2 answers

In a Set Values Action in a Value field.

In a Remote Action in an Additional Output value field.

In a DataRaptor Action in an Input Parameters value field.

In a DataRaptor in an Output Tab Output JSON Path.

NEW QUESTION 41
Refer to the following row-versioned calculation matrix.

The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?

The row is delete only in Version 3.

The row is deleted In Versions 2 and 3 but will remain in Version 1.

The row is deleted in Version 3 and Version 1.

The row is deleted in all versions

NEW QUESTION 42
A developer has a requirement to create a child FlexCard that contains all of its parent FlexCard’s records In a Datable How should the developer configure the parent FlexCard’s Node?

{Records{0}}

{Records}

{Params, records}

{Recorded}

NEW QUESTION 43
Which description below best matches what Publish Options does?

Enable a FlexCard to use a Viocity Integration Procedure to return a set of actions

Configure metadata values and set the target for the published FlexCard

Make the FlexCard usable in the OmniScript Designer via the Custom LWC element

Enable grouping FlexCards by object type or by the order they appear in the database

NEW QUESTION 44
In an Integration Procedure, you need to perform a multi-step calculation on every element of an array. Based on best practices, what two methods are recommended? Choose 2 answers

Use a Calculation Action to call a Calculation Procedure.

Use a Set Values Element inside a Loop Block.

Use a List Action to merge the array elements together.

Use a Matrix Action to call a Calculation Matrix

NEW QUESTION 45
While using the Lightning App Builder, you add a Custom Component to the console, but the component you want to add does not appearin the dropdown list.
What could cause this?

The FlexCard has a recordid that is for the wrong record type.

The record displayed in the Lightning App Builder preview has no data for the record displayed.

The data source for the FlexCard is not active.

The FlexCard does not have an active version.

NEW QUESTION 46
Refer to theexhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.

A)

B)

C)

D)

Option A

Option B

Option C

Option D

NEW QUESTION 47
A developer needs to build a multi-step intake form. Each step must allow the user to cancel the intake at any time. The developer is using an LWC OmniScript to build the form.
How should the developer implement the cancel functionality for all steps using the LWC OmniScript Designer?

Check the Enable Cancel checkbox in the Setup tab under Cancel Options.

Add a navigation Action inside each step and set the Component name to ”Cancel”,

Add a navigation Action outside each step and set the Element Name to ”Cancel”,

Add a navigation Action inside each step and set the Element Name to ”Cancel”,

NEW QUESTION 48
Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of the Action1 element to a Remote Action?

Action1. BlockB. Block A

Action1: BlockB. Block A

BlockA: BlockB. Action 1

BlockB: BlockB. Action1

NEW QUESTION 49
Users receive an APEC CPU limit Exceeded error when running an OmniScript in a Salesfoce Community. The OmniScript includes an Integration Procedure that contains two DataRaptors.
Which two Location should the developer check to troubleshoot the issue?
Choose 2 answers

Script configuration

Community logs

DataRaptor configuration

Action Debugger

NEW QUESTION 50
Refer to the exhibit below.

What isthe reason that the fields fail to display the fetched data?