Quality H12-811 PDF Dumps – H12-811 Exam Questions [Q23-Q37]

NO.23 What kind of message does the OSPF protocol use to send LSA to neighbors?

NO.24 What elements can NAPT convert?

NO.25 How to enter the view of OSPF area 0 in the vrp operating system? (Multiple choice)

NO.26 As shown in the figure, the switch runs STP with default parameters, which of the following ports will be elected as the designated port?

NO.27 ,:: 1/128 is the IPv6 loopback address.

NO.28 Which of the following statements about the role of STP protocol Forward Delay is correct?

NO.29 When the router is powered on, it will read the configuration file from the default storage path to initialize the router. If there is no configuration file in the default storage path, what will the router use for initialization?

NO.30 What is the priority value of the direct route entry?

NO.31 Apply the ACL configured as shown in the figure in Telnet. Only the device with the IP address of 172.16.105.2 is allowed to log in remotely:
#
acl number 2000
rule 5 permit source 172.16.105.2 0
#

NO.32 Network equipment running the SNMP protocol can take the initiative to report alarm information so that the network administrator can discover the fault in time.

NO.33 As shown in the figure, there is a web server in the private network that needs to provide HITRP services to public network users. Therefore, the network administrator needs to configure NAT on the gateway router RTA to achieve the requirements. Which of the following configuration can meet the requirement?

NO.34 Which of the following descriptions of OSPF areas are correct? (Multiple choice)

NO.35 The configuration information of a certain port of the switch is shown in the figure. Which of the following statements is wrong?

NO.36 The IEEE 802.11ac standard only supports the 5GHz frequency band.

NO.37 When the Access type port sends a message, it will ().