Jun-2024 Microsoft PL-500 Actual Questions and Braindumps [Q57-Q76]

PL-500 Microsoft

admin -

June 12, 2024

Rate this post

Jun-2024 Microsoft PL-500 Actual Questions and Braindumps

PL-500 Dumps To Pass Microsoft Exam in 24 Hours – DumpsTests

Why do you need to get Microsoft PL-500 Exam

Are you ready to take the Microsoft Power Automate RPA Developer Exam

PL-500 Exam: Key Points and Focus Areas

Pl-500, Microsoft Power Automate RPA Developer Exam is designed for the IT professionals who are working as a technical resource for design and implementation of enterprise workflow management solutions. The exam measures your ability to accomplish the technical tasks listed below. The percentages indicate the relative weight of each major topic area on the Microsoft PL-500 Exam. The higher the percentage, the more questions you are likely to see on that content area in the exam.

Microsoft Power Automation RPA Developer Certification has added some new features. The most recent feature is to use the Microsoft REST guidelines for developing automation services. In this blog post, I will talk about the new changes and the tips to follow to pass the Microsoft Exam in first attempt. These changes have brought some confusion to the IT Professionals who are preparing for RPA developer exam.

Are you ready to take the Microsoft Power Automation and Orchestration Developer Exam? Maybe you’re already taking it, and need a little bit more preparation. Regardless of where you are in the exam process, I wrote the following guide to cover some of the key points you should focus on during your studies to help ensure passing the PL-500 with ease. Our Microsoft PL-500 exam dumps are best way to save your time and money.

NO.57 You need to resolve the fulfillment status flow issue.
Which three actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

Ensure that the flow instance does not remain in the queue for more than three hours.

Ensure that all users are signed out from the target machine.

Use different local Windows accounts for all machines.

Ensure that the flow is not using elevated privileges.

Trigger the flow by using an on-premises data gateway.

To resolve the fulfillment status flow issue, you need to perform three actions:
Ensure that all users are signed out from the target machine. This will prevent any interference or interruption from other users who might be logged in to the same machine where the desktop flow is running1.
Use different local Windows accounts for all machines. This will ensure that each machine has a unique identity and credentials for running desktop flows1.
Ensure that the flow is not using elevated privileges. This will avoid any security risks or errors that might occur when running desktop flows with administrator rights1.

NO.58 You need to package the automations. What should you do?

Show dependencies within the solution.

Remove unmanaged layers.

Add required components to each item within the solution.

Add existing components to the solution.

According to the scenario, you want to package all your automations into a single solution that can be easily deployed across environments. To do this, you need to add existing components to the solution, such as cloud flows, desktop flows, connections, and custom connectors. This way, you can bundle all your related resources into one package and export or import it as needed.

NO.59 You develop automation solutions for a company.
When a new record is added to a Microsoft Dataverse table, the solution must add the contents of the record to a Microsoft Word Online (Business) template The solution must convert the template to a PDF document and email the PDF document to a stakeholder.
You need to design the solution.
Which three actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Use the Convert Word Document to PDF and Send an email actions in a cloud flow.

Use the Convert Word Document to PDF and Send an email actions in a desktop flow.

Use the Populate a Microsoft Word Online (Business) template action in a desktop flow.

Use the Populate a Microsoft Word Online (Business) template action in a cloud flow.

Create a cloud flow that uses the When a row is added or modified trigger in Microsoft Dataverse.

NO.60 You need to set up a policy for the developer to perform desktop flow testing.
Which two actions should you do? Each correct answer presents a part of the solution.
NOTE; Each correct selection is worth one point.

Create a tenant-level Microsoft Power Platform data loss prevention (DLP) policy.

Add the custom connector to the Non-business connector group.

Create a Microsoft Power Platform data loss prevention (DLP) policy in the development environment.

Add the custom connector to the Business connector group.

Move the SharePoint connector to the Non-business connector group

NO.61 You are developing a cloud flow.
The flow must be able to query several Azure endpoints and must use standard actions where possible.
You need to configure the flow.
Which actions should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation
http
http with azure AD
http with azure ad
http with azure ad
http request to sharepoint.

NO.62 You need to identify the cause for the SMSApp data entry issue. What is the root cause?

The DLP policy that contains the desktop flow connector was deleted.

The default policy group is set to Blocked.

The desktop flow was not shared with the finance clerk.

The scope of the DLP policy was changed to exclude the development environment

The Power Automate Management connector is assigned to the Business category.

According to the scenario, the SMSApp data entry issue occurred after a DLP policy change that excluded the development environment from its scope. This means that any desktop flow that uses connectors in the development environment will be blocked by the DLP policy1. Therefore, the root cause of the issue is option D.

NO.63 You need to determine the correct group for each connector used in the automations.
Which groups should you use? To answer, move the appropriate connector to the correct group. You may use each group once, more than once, or not at alt. You may need to move the split bar between panes or scroll to view content NOTE: Each correct selection is worth one point.

Explanation:

NO.64 You are developing a cloud flow.
The flow must be able to query several Azure endpoints and must use standard actions where possible.
You need to configure the flow.
Which actions should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation
Graphical user interface, text, application, email Description automatically generated

NO.65 You are editing a cloud flow in the Power Automate flow designer.
You need to resubmit the most recent trigger.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Explanation

NO.66 You need to configure the flow for processing invoices that arrive in the AP mailbox. Which three elements should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Document type

Location

Pages

Al model

Form type

Form

To configure a flow for processing invoices that arrive in an email, you need to use three elements: document type, AI model, and form type.
Document type specifies what kind of document you want to process, such as invoices, receipts, or business cards.
AI model determines how the document data will be extracted and analyzed, such as using a prebuilt model or a custom model.
Form type defines how the extracted data will be mapped to a table in Dataverse, such as using a standard form or a custom form.

NO.67 You create an unattended Office 365 automation. The automation stops running.
You suspect that the runtime identity used by the automation caused the automation to stop running. Which two issues can the runtime identity cause in this scenario? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

The automation is attempting to open files that cannot be opened or edited based on per-user access permissions

The automation is not set up to handle an additional sign-in Ul element.

The unattended automation process suppressed an alert that was generated.

The location of a specific user interface element has changed.

NO.68 You are developing a new release for an automation solution.
You need to use the right feature.
Which feature should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation
Graphical user interface, text, application, email Description automatically generated

NO.69 You are developing automation solutions for a company.
You need to use an environment variable in a cloud flow.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Explanation:
Text Description automatically generated with medium confidence

NO.70 You develop automation solutions for a company.
You need to implement actions to meet the company’s requirements.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

Explanation:

NO.71 You need to configure the flow for processing invoices that arrive in the AP mailbox. Which three elements should you use? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Document type

Location

Pages

Al model

Form type

Form

NO.72 You are preparing to create a cloud flow that queries data from a SharePoint list.
You must use different SharePoint lists for the test and production environments.
You need to configure the flow to select the correct SharePoint list for the environment where you deploy the flow.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

* Create a new cloud flow in a solution and add a Get items action.
* In the solution, create an environment variable where Data Type equals Data source and Parameter Type equals Site. This will store the SharePoint site URL as a variable.
* In the solution, create another environment variable where Data Type equals Data source and Parameter Type equals List. This will store the SharePoint list name as a variable.
* Choose a SharePoint site and list from available environmental variables in the Get items action. You can use the parameters function to reference the variables by name.
* Enter custom values for the target SharePoint site and list in each environment where you deploy the flow. You can do this while importing the solution or by editing the environment variables.

NO.73 You create a solution that includes a Power Automate cloud flow and desktop flow. You observe the following issues with the solution:
* A single Power Automate cloud flow action has a long run time.
* The Power Automate desktop flow encounters an error.
You need to debug the solution.
Which debug features should you use? To answer, select the appropriate options in the answer area.

NO.74 You create a solution within a Microsoft Power Platform environment. The environment includes all connections required for the solution.
You need to create a connection reference for the flows.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the order.

Explanation
Text, table Description automatically generated with medium confidence

NO.75 You create a Microsoft Power Platform solution. You create variables to define input values for the flow. You export the solution as managed and import the solution into a user acceptance testing (UAT) environment.
The flow in the UAT environment is still using the values from the development (DEV) environment.
You need to resolve the issue.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Explanation
Graphical user interface, text, application, email Description automatically generated

NO.76 You are preparing to create a cloud flow that queries data from a SharePoint list.
You must use different SharePoint lists for the test and production environments.
You need to configure the flow to select the correct SharePoint list for the environment where you deploy the flow.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Loading …

Microsoft PL-500 Certification Exam, also known as the Microsoft Power Automate RPA Developer Exam, is designed for professionals who want to demonstrate their expertise in building and deploying robotic process automation (RPA) solutions using Microsoft Power Automate. PL-500 exam measures the candidate’s knowledge and skills in various areas, including designing and developing RPA solutions, configuring and managing bots, integrating with other Microsoft tools and services, and maintaining and troubleshooting RPA solutions.

Download the Latest PL-500 Dump – 2024 PL-500 Exam Question Bank: https://www.dumpstests.com/PL-500-latest-test-dumps.html