Updated Mar-2026 Exam Engine for FCP_FAZ_AN-7.4 Exam Free Demo & 365 Day Updates [Q16-Q32]

admin -

March 15, 2026

Rate this post

Updated Mar-2026 Exam Engine for FCP_FAZ_AN-7.4 Exam Free Demo & 365 Day Updates

Exam Passing Guarantee FCP_FAZ_AN-7.4 Exam with Accurate Quastions!

Fortinet FCP_FAZ_AN-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	Logging: Candidates will learn about logging mechanisms, log analysis, and gathering log statistics to effectively monitor security events and incidents.
Topic 2	Playbooks: This domain measures the skills of Fortinet Network Analysts in creating and managing playbooks. Candidates will explain playbook components and develop workflows that automate responses to security incidents, improving operational efficiency in SOC environments.
Topic 3	SOC Events and Incident Management: This domain targets Fortinet Network Analysts and focuses on managing security operations center (SOC) events. Candidates will explain SOC features on FortiAnalyzer, manage events and incidents, and understand the incident lifecycle to enhance incident response capabilities.
Topic 4	Features and Concepts: This section of the exam measures the skills of Fortinet Security Analysts and covers the fundamental concepts of FortiAnalyzer.
Topic 5	Reports: This section evaluates the skills of Fortinet Security Analysts in managing reports within FortiAnalyzer. Candidates will learn to create, troubleshoot, and optimize reports to ensure accurate data presentation and insights for security analysis.

NEW QUESTION 16
You are using RAID with a FortiAnalyzer that supports software RAID, and one of the hard disks on FortiAnalyzer has failed.
What is the recommended method to replace the disk?

Shut down FortiAnalyzer and then replace the disk

Downgrade your RAID level, replace the disk, and then upgrade your RAID level

Clear all RAID alarms and replace the disk while FortiAnalyzer is still running

Perform a hot swap

NEW QUESTION 17
For proper log correlation between the logging devices and FortiAnalyzer, FortiAnalyzer and all registered devices should:

Use DNS

Use an NTP server

Use real-time forwarding

Use host name resolution

NEW QUESTION 18
A FortiAnalyzer device could use which security method to secure the transfer of log data from FortiGate devices?

SSL

IPSec

Direct serial connection

S/MIME

NEW QUESTION 19
Refer to the exhibit.

Laptop1 is used by several administrators to manage FortiAnalyzer. You want to configure a generic text filter that matches all login attempts to the web interface generated by any user other than “admin” and coming from Laptop1.
Which filter will achieve the desired result?

operation-login & performed_on==”GUI(10.1.1.100)” & user!=admin

operation-login & srcip==10.1.1.100 & dstip==10.1.1.210 & user==admin

operation-login & dstip==10.1.1.210 & userl-admin

operation-login & performed_on==”GUI(10.1.1.210)’ & user!=admin

NEW QUESTION 20
Exhibit.

What can you conclude from this output?

There is not disk quota allocated to quarantining files.

FGT_B is the Security Fabric root.

The allocated disk quote to ADOM1 is 3 GB.

Archive logs are using more space than analytic logs.

The exhibit displays a diagnose log device output on a FortiAnalyzer, showing details about disk space usage and quotas for different FortiGate devices and ADOMs (Administrative Domains). Here’s a breakdown of key details:
* Disk Quota for Quarantined Files:
* The output includes columns labeled for used space in categories such as “logs,” “quarantine,”
“content,” and “DB.” For each device, the quarantine column consistently shows 0.0KB used, indicating that there is no disk quota allocated or utilized for quarantining files.
* Conclusion:Correct.
* FGT_B as Security Fabric Root:
* There is no direct indication from this output that specifies FGT_B is the root of the Security Fabric. Information on Security Fabric topology or root designation would typically come from a Security Fabric configuration command rather than a disk usage summary.
* Conclusion:Incorrect.
* Allocated Disk Quota for ADOM1:
* The output shows the quota for ADOM1 is “unlimited,” not a fixed 3 GB quota. Therefore, there is no set 3 GB limit for ADOM1.
* Conclusion:Incorrect.
* Comparison of Archive Logs and Analytic Logs:
* The output does not differentiate between archive logs and analytic logs; it only shows overall disk usage by type (e.g., logs, quarantine). Therefore, no conclusion can be made about which type of logs (archive or analytic) is using more space.
* Conclusion:Incorrect.
Conclusion:
* Correct Answer:A. There is no disk quota allocated to quarantining files.
* This answer aligns with the observed data, where no disk space is used or allocated for quarantine files.
References:
* FortiAnalyzer 7.4.1 documentation on diagnose log device command usage and disk quota settings.

NEW QUESTION 21
View the exhibit.

What does the data point at 14:35 tell you?

FortiAnalyzer is dropping logs.

The sqlplugind daemon is ahead in indexing by one log.

FortiAnalyzer has temporarily stopped receiving logs so older logs’ can be indexed.

FortiAnalyzer is indexing logs faster than logs are being received.

NEW QUESTION 22
A playbook contains five tasks in total. An administrator runs the playbook and four out of five tasks finish successfully, but one task fails.
What will be the status of the playbook after it is run?

Attention required

Upstream_failed

Failed

Success

In FortiAnalyzer, when a playbook is run, each task’s status impacts the overall playbook status. Here’s what happens based on task outcomes:
* Status When All Tasks Succeed:
* If all tasks finish successfully, the playbook status is marked asSuccess.
* Status When Some Tasks Fail:
* If one or more tasks in the playbook fail, but others succeed, the playbook status generally changes toAttention required. This status indicates that the playbook completed execution but requires review due to one or more tasks failing.
* This is different from a completeFailedstatus, which is used if the playbook cannot proceed due to a critical error in an early task, often one that upstream tasks depend on.
* Option Analysis:
* A. Attention required: This is correct as the playbook has completed, but with partial success and a task requiring review.
* B. Upstream_failed: This status is used if a task cannot run because a prerequisite or “upstream” task failed. Since four out of five tasks completed, this is not the case here.
* C. Failed: This status would imply that the playbook completely failed, which does not match the scenario where only one task out of five failed.
* D. Success: This status would apply if all tasks had completed successfully, which is not the case here.
Conclusion:
* Correct Answer:A. Attention required
* The playbook status reflects that it completed, but an error occurred in one of the tasks, prompting the administrator to review the failed task.
References:
* FortiAnalyzer 7.4.1 documentation on playbook execution statuses and task error handling.

NEW QUESTION 23
In the FortiAnalyzer FortiView, source and destination IP addresses from FortiGate devices are not resolving to a hostname.
How can you resolve the source and destination IP addresses, without introducing any additional performance impact to FortiAnalyzer?

Resolve IP addresses on a per-ADOM basis to reduce delay on FortiView while IPs resolve

Resolve IP addresses on FortiGate

Configure local DNS servers on FortiAnalyzer

Configure # set resolve-ip enable in the system FortiView settings

NEW QUESTION 24
Refer to the exhibit.

Why is the total quota less than the total system storage?

Some space is reserved for system use, such as storage of compression files, upload files and temporary report files

3.6% of the system storage is already being used

The logfiled process is just estimating the total quota

The oftpd process has not archived the logs yet

NEW QUESTION 25
When working with FortiAnalyzer reports, what is the purpose of a dataset?

To set the data included in templates

To retrieve data from the database

To provide the layout used for reports

To define the chart type to be used

NEW QUESTION 26
What FortiGate process caches logs when FortiAnalyzer is not reachable?

miglogd

oftpd

logfiled

sqlplugind

NEW QUESTION 27
Which statement describes archive logs on FortiAnalyzer?

Logs that are indexed and stored in the SQL database

Logs a FortiAnalyzer administrator can access in FortiView

Logs compressed and saved in files with the .gz extension

Logs previously collected from devices that are offline

In FortiAnalyzer, archive logs refer to logs that have been compressed and stored to save space. This process involves compressing the raw log files into the .gz format, which is a common compression format used in Fortinet systems for archived data. Archiving is essential in FortiAnalyzer to optimize storage and manage long-term retention of logs without impacting performance.
Let’s examine each option for clarity:
* Option A: Logs that are indexed and stored in the SQL database
* This is incorrect. While some logs are indexed and stored in an SQL database for quick access and searchability, these are not classified as archive logs. Archived logs are typically moved out of the database and compressed.
* Option B: Logs a FortiAnalyzer administrator can access in FortiView
* This is incorrect because FortiView primarily accesses logs that are active and indexed, not archived logs. Archived logs are stored for long-term retention but are not readily available for immediate analysis in FortiView.
* Option C: Logs compressed and saved in files with the .gz extension
* This is correct. Archive logs on FortiAnalyzer are stored in compressed .gz files to reduce space usage. This archived format is used for logs that are no longer immediately needed in the SQL database but are retained for historical or compliance purposes.
* Option D: Logs previously collected from devices that are offline
* This is incorrect. Although archived logs may include data from devices that are no longer online, this is not a defining characteristic of archive logs.
* FortiAnalyzer 7.4.1 documentation and configuration guides outline that archived logs are stored in compressed files with the .gz extension to conserve storage space, ensuring FortiAnalyzer can handle a larger volume of logs over extended periods.

NEW QUESTION 28
Which two actions should an administrator take to vide Compromised Hosts on FortiAnalyzer? (Choose two.)

Enable device detection on the FotiGate device that are sending logs to FortiAnalyzer.

Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to fortiAnalyzer.

Make sure all endpoints are reachable by FortiAnalyzer.

Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date.

To view Compromised Hosts on FortiAnalyzer, certain configurations need to be in place on both FortiGate and FortiAnalyzer. Compromised Host data on FortiAnalyzer relies on log information from FortiGate to analyze threats and compromised activities effectively. Here’s why the selected answers are correct:
Option A: Enable device detection on the FortiGate devices that are sending logs to FortiAnalyzer Enabling device detection on FortiGate allows it to recognize and log devices within the network, sending critical information about hosts that could be compromised. This is essential because FortiAnalyzer relies on these logs to determine which hosts may be at risk based on suspicious activities observed by FortiGate. This setting enables FortiGate to provide device-level insights, which FortiAnalyzer uses to populate the Compromised Hosts view.
Option B: Enable web filtering in firewall policies on FortiGate devices, and make sure these logs are sent to FortiAnalyzer Web filtering is crucial in identifying potentially compromised hosts since it logs any access to malicious sites or blocked categories. FortiAnalyzer uses these web filter logs to detect suspicious or malicious web activity, which can indicate compromised hosts. By ensuring that FortiGate sends these web filtering logs to FortiAnalyzer, the administrator enables FortiAnalyzer to analyze and identify hosts engaging in risky behavior.
Let’s review the other options for clarity:
Option C: Make sure all endpoints are reachable by FortiAnalyzer
This is incorrect. FortiAnalyzer does not need direct access to all endpoints. Instead, it collects data indirectly from FortiGate logs. FortiGate devices are the ones that interact with endpoints and then forward relevant logs to FortiAnalyzer for analysis.
Option D: Subscribe FortiAnalyzer to FortiGuard to keep its local threat database up to date Although subscribing to FortiGuard helps keep threat intelligence updated, it is not a requirement specifically to view compromised hosts. FortiAnalyzer primarily uses logs from FortiGate (such as web filtering and device detection) to detect compromised hosts.

NEW QUESTION 29
Refer to Exhibit:

What does the data point at 21:20 indicate?

FortiAnalyzer is indexing logs faster than logs are being received.

The fortilogd daemon is ahead in indexing by one log.

The SQL database requires a rebuild because of high receive lag.

FortiAnalyzer is temporarily buffering received logs so older logs can be indexed first.

The exhibit shows a graph that tracks two metrics over time: Receive Rate and Insert Rate. These two rates are crucial for understanding the log processing behavior in FortiAnalyzer.
* Understanding Receive Rate and Insert Rate:
* Receive Rate: This is the rate at which FortiAnalyzer is receiving logs from connected devices.
* Insert Rate: This is the rate at which FortiAnalyzer is indexing (inserting) logs into its database for storage and analysis.
* Data Point at 21:20:
* At 21:20, the Insert Rate line is above the Receive Rate line, indicating that FortiAnalyzer is inserting logs into its database at a faster rate than it is receiving them. This situation suggests that FortiAnalyzer is able to keep up with the incoming logs and is possibly processing a backlog or temporarily received logs faster than new logs are coming in.
* Option Analysis:
* Option A – FortiAnalyzer is Indexing Logs Faster Than Logs are Being Received: This accurately describes the scenario at 21:20, where the Insert Rate exceeds the Receive Rate. This indicates that FortiAnalyzer is handling logs efficiently at that moment, with no backlog in processing.
* Option B – The fortilogd Daemon is Ahead in Indexing by One Log: The data does not provide specific information about the fortilogd daemon’s log count, only the rates. This option is incorrect.
* Option C – SQL Database Requires a Rebuild: High receive lag would imply a backlog in receiving and indexing logs, typically visible if the Receive Rate were significantly above the Insert Rate, which is not the case here.
* Option D – FortiAnalyzer is Temporarily Buffering Logs to Index Older Logs First: There is no indication of buffering in this scenario. Buffering would usually occur if the Receive Rate were higher than the Insert Rate, indicating that FortiAnalyzer is storing logs temporarily due to indexing lag.
Conclusion:
* Correct answer: A. FortiAnalyzer is indexing logs faster than logs are being received.
* The graph at 21:20 shows a higher Insert Rate than Receive Rate, indicating efficient log processing by FortiAnalyzer.
References:
FortiAnalyzer 7.4.1 documentation on log processing metrics, Receive Rate, and Insert Rate indicators.

NEW QUESTION 30
Which two external servers can you configure to validate administrator logins? (Choose two.)

Syslog

LDAP

RADIUS

Only locally by FortiAnalyzer

NEW QUESTION 31
How are logs forwarded when FortiAnalyzer is using aggregation mode?

Logs are forwarded as they are received and content files are uploaded at a scheduled time.

Logs and content files are stored and uploaded at a scheduled time.

Logs are forwarded as they are received.

Logs and content files are forwarded as they are received.

NEW QUESTION 32
An administrator has moved FortiGate A from the root ADOM to ADOM1. However, the administrator is not able to generate reports for FortiGate A in ADOM1.
What should the administrator do to solve this issue?

Use the execute sql-local rebuild-db command to rebuild all ADOM databases.

Use the execute sql-local rebuild-adom ADOM1 command to rebuild the ADOM database.

Use the execute sql-report run ADOM1 command to run a report.

Use the execute sql-local rebuild-adom root command to rebuild the ADOM database.

Loading …