Free 2026 NSE5_FNC_AD-7.6 Dumps 100 Pass Guarantee With Latest Demo [Q34-Q55]

admin -

July 17, 2026

Rate this post

Free 2026 NSE5_FNC_AD-7.6 Dumps 100 Pass Guarantee With Latest Demo

Prepare NSE5_FNC_AD-7.6 Question Answers Free Update With 100% Exam Passing Guarantee [2026]

NEW QUESTION 34
Refer to the exhibits. Based on the given configurations and settings, on which date and time would a guest account created at 8:00 AM on 2025/09/12 expire?

2025/09/12 at 8:00 PM

2025/09/12 at 7:00 PM

2025/09/12 at 17:00:00

2025/09/13 at 17:00:00

NEW QUESTION 35
Which group type can have members added directly from the FortiNAC Control Manager?

Administrator

Device

Port

Host

NEW QUESTION 36
When working with a FortiNAC-F Manager and cluster management, what will occur when a cluster manager recovers from a non-responsive state?

It automatically returns to the manager state

It will perform a health check and be demoted to standby

It will be removed from the cluster and placed in a standalone group

It rejoins the cluster as a worker node

NEW QUESTION 37
When configuring isolation networks in the configuration wizard, why does a layer 3 network type allow for more than one DHCP scope for each isolation network type?

The layer 3 network type allows for one scope for each possible host status.

Configuring more than one DHCP scope allows for DHCP server redundancy

There can be more than one isolation network of each type

Any scopes beyond the first scope are used if the initial scope runs out of IP addresses.

NEW QUESTION 38
When configuring FortiNAC-F to manage FortiGate VPN users, an endpoint compliance policy must be created for the integration.
Why is the endpoint compliance policy necessary for this type of integration?

To designate the required agent type

To validate the VPN user credentials

To confirm the installed endpoint certificate

To validate the VPN client being used

NEW QUESTION 39
What must an administrator configure to allow FortiNAC-F to process incoming syslog messages that are not supported by default?

A Syslog Service Connector

A Security Action

A Security Event Parser

A Log Receiver

NEW QUESTION 40
In an isolation VLAN which three services does FortiNAC supply? (Choose three.)

NTP

DHCP

Web

DNS

ISMTP

NEW QUESTION 41
Which two things must be done to allow FortiNAC to process incoming syslog messages from an unknown vendor? (Choose two.)

A security event parser must be created for the device.

The device sending the messages must be modeled in the Network Inventory view.

The device must be added as a patch management server.

The device must be added as a log receiver.

NEW QUESTION 42
An administrator wants to control user access to corporate resources by integrating FortiNAC-F with FortiGate using firewall tags defined on FortiNAC-F.
Where would the administrator assign the firewall tag value that will be sent to FortiGate?

RADIUS group attribute

Logical network

Device profiling rule

Security rule

NEW QUESTION 43
Which two agents can validate endpoint compliance transparently to the end user? (Choose two.)

Dissolvable

Mobile

Passive

Persistent

NEW QUESTION 44
Which agent can receive and display messages from FortiNAC to the end user?

Dissolvable

Persistent

Passive

MDM

NEW QUESTION 45
While troubleshooting a network connectivity issue, an administrator determines that a device was being automatically provisioned to an incorrect VLAN.
Where would the administrator look to identify when and why FortiNAC-F made the network access change?

The Port Changes view

The Security Event view

The Reports view

The Admin Auditing view

NEW QUESTION 46
An administrator wants to use FortiNAC-F to prevent internal engineers from accessing specific websites as defined in web filter categories on FortiGate.
In addition to a security trigger and associated action, which configuration must also be defined on FortiNAC-F?

A profiling method

A firewall policy

A compliance policy

A user/host profile

NEW QUESTION 47
When creating a user or host profile, which three criteria can you apply? (Choose three.)

Host or user group memberships

Host or user attributes

Adapter current VLAN

An applied access policy

Location

NEW QUESTION 48
An administrator is configuring FortiNAC to manage FortiGate VPN users. As part of the configuration, the administrator must configure a few FortiGate firewall policies. What is the purpose of the FortiGate firewall policy that applies to unauthorized VPN clients?

To deny access to only the production DNS server

To allow access to only the FortiNAC VPN interface

To allow access to only the production DNS server

To deny access to only the FortiNAC VPN interface

NEW QUESTION 49
Refer to the exhibit.

An administrator wants to ensure that guest accounts created from this template are not allowed network access outside of the designated times.
To achieve this, all necessary configurations must be made to force isolation of hosts in which state?

Non-authenticated

At-risk

Disabled

Rogue

NEW QUESTION 50
Two FortiNAC-F devices have been configured as a 1+1 HA pair. The primary server went offline and a successful failover to the secondary has occurred.
What happens if the primary server comes back online?

The secondary server will update the primary and the servers will load balance until an administrator forces the primary to resume full control.

After five successful heartbeats between the servers, the primary server will resume control.

The primary server will determine that the secondary has control and power down for maintenance.

The primary and secondary servers will resume communication and the secondary will maintain control.

NEW QUESTION 51
Refer to the exhibit. If a host is connected to a port in the Building 1 First Floor Ports group, what must also be true to match this user/host profile?

The host must have a role value of contractor, an installed persistent agent or a security access value of contractor, and be connected between 6 AM and 5 PM.

The host must have a role value of contractor or an installed persistent agent, a security access value of contractor, and be connected between 9 AM and 5 PM.

The host must have a role value of contractor or an installed persistent agent or a security access value of contractor, and be connected between 6 AM and 5 PM.

The host must have a role value of contractor or an installed persistent agent and a security access value of contractor, and be connected between 6 AM and 5 PM.

NEW QUESTION 52
An administrator has created several device profiling rules and evaluated all existing devices in the database. Some of the devices appear in the profiled devices view because they matched a rule, but they remain unknown and the registration column in the profiled devices view shows
“No”.
What is the most likely cause?

The confirm device profiling rule option is not enabled.

The devices match more than one device profiling rule.

The device profiling rule has registration set to manual.

The devices have persistent agents installed, and the point of connection has PA optimization enabled.

NEW QUESTION 53
Refer to the exhibit. An administrator wants to use FortiNAC-F to automatically provision printers throughout their organization. Each building uses its own local VLAN for printers.
Which FortiNAC-F feature would allow this to be accomplished with a single network access policy?

Dynamic host groups

Logical networks

Device profiling rules

Preferred VLAN designations

NEW QUESTION 54
While discovering network infrastructure devices, a switch appears in the inventory topology with a question mark (?) on the icon. What would cause this?

The wrong SNMP community string was entered during discovery.

The SNMP ObjectlD is not recognized by FortiNAC-F.

A read-only SNMP community siring was used.

SNMP is not enabled on the switch.

NEW QUESTION 55
When creating a device profiling rule, what are two advantages of registering the device in the host view? (Choose two.)

The devices can be managed as a generic SNMP device.

The devices will have connection logs.

The devices can be associated with a user.

The devices can be polled for connection status.

In FortiNAC-F, the Device Profiler is a rule-based engine that evaluates unknown “rogue” devices and classifies them based on fingerprints and behavior. When a profiling rule matches a device, the administrator can configure the rule to automatically register that device. The registration process can place the device record in two primary locations: the Topology View (as a device) or the Host View (as a registered host).
According to the FortiNAC-F Administration Guide, registering a device in the Host View provides significant advantages for identity management and historical tracking. First, the devices can be associated with a user (C). In the FortiNAC database architecture, the Host View is the primary repository for endpoint identity; placing a profiled device here allows the system to link that hardware (MAC address) to a specific user account, whether that user is an employee, guest, or a system-level “owner”. This association is essential for Role-Based Access Control (RBAC) and for tracking accountability across the network fabric.
Second, devices registered in the Host View will have connection logs (B). FortiNAC-F maintains a detailed operational history for all host records, including every instance of the device connecting to or disconnecting from a port, its IP address assignments, and the specific policies applied during each session. These logs are invaluable for troubleshooting connectivity issues and for security forensic audits, as they provide a clear timeline of the device’s lifecycle on the network. In contrast, devices managed only in the Topology View are typically treated as infrastructure components where the focus is on device availability rather than individual session history.
“Devices that are registered and associated with a user are placed in the Host View and removed from the Profiled Devices window… Placing a device in the Host View allows for the tracking of connection history and the association of the device with a specific identity or user record within the FortiNAC database.”